- Home
- ยป
- Our Products
- »
- Magnetic Drilling Machine
Magnetic Drilling Machine
SWC 35 AT Magnetic Drilling Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Weight | 15kg |
Spindle | 19mm |
Power Consumption | 1100 Watt |
Model Name/Number | SWC 35 AT |
Broach Cutter(50mm Length) | 12-35mm |
Flexible Stroke Upto | 240mm |
Motor Power | 1100 Watt |
Flexible Stroke | 240mm |
Input Supply Voltage | 220 V |
Broach Cutter (35mm Length) | 12-35mm |
Spindle Size | 19mm |
Twist Drill | Upto 13mm |
Magnet Power | 10000 N |
RPM | 45min |
Electro Torque Control | Yes |
Voltage | 220 V |
Warning This Application Must Be Earthened
Always secure the machine with the supplied safety chain before starting to operate, this is to protect the user in case of power failure or breaking loose of the magnet while in use.Always wear safetygoggles, gloves and ear plugs. Disconnect from the power source when changing cutters or working on the machine.Always ensure cutter retaining screws are secure — they sometimes vibrate loose in use. Regularly clean the work area and machine., remove swarf and dirt, paying particular attention to the underside of the magnetWith a gloved hand, after switching off the power, remove any swarf which might have gathered around the cutter and arbor before proceeding to the next hole. Remove tie, rings, watches and any loose adornments which might entangle with the rotating parts of the machine Should the cutter get stuck in the workpiece, stop the motor immediately toprevent personal injury. Disconnect from the power source and push and pull the arbor by hand. If the machine is accidentally dropped, always thoroughly examine the machine for signs of damage and check that it functions correctly before trying to drill a hole. Regularly inspect the machine and cutting spray which is specially designed for inverted position drilling.Use only spare parts advised by your dealer for magnetic drilling machinesUse the magnetic drilling unit on a clean and flat surface only, to prevent the machine breaking out because of poor clamping force. WARNING It is mandatory to read and follow all the safety norms, regulations and instructions given in this Guide before you operate the machine to avoid unwanted and fatal accidents. Follow the mentioned workplace safety measures in the guide strictly to ensure your safety against electric shocks or injuries.
Self Protection
The machine operators must start their work only after wearing protective gears like eyeglasses, ear muffs, and insulated shoes tightened to the legs ensuring comfortable movement. Never operate the machine using your feet or remove the slug without wearing the gloves. Never work towards the maintenance of the circuit board if you haven''t followed all the rules mentioned above.
Mandatory Rules For The Work Place
Say no to a messy work environment completely. Keep yourself protected against fatal accidents by keeping the area clean.In case the floor is wet, stop the usage of the drill machine immediately. You will expose yourself to the risk of shock if you don''t.Only when the surroundings around are brightly lit, use the machine instead of a dark environmentYou should not never place flammable material near the machine or avoid using the drill machine in the presence of anything flammable. The drill machine tends to produce sparks in the process of working, which may cause FireChildren should never be allowed near the drill machine, especially when it is being operated.Nobody should be in the area where the drill machine is being used by the
Operator.
Mandatory Rules To Ensure Safety
Additional Information:
- Item Code: 4545
- Production Capacity: 5
- Delivery Time: 5 DAYS
- Packaging Details: 1 PLASTIC SUIT CASE
SWC 50 WT Magnetic Drilling Machine
Minimum Order Quantity: 2 Piece
Product Brochure
Width | 80mm |
Frequency | 50/60Hz |
Weight | 16kg |
Spindle | MT3, 19mm Weldon |
Power Consumption | 2kW/hour |
Model Name/Number | SWC 50 WT |
Broach Cutter (80mm Length) | 18-26mm |
RPM | 250 min-1 |
Stroke | Flexible Stroke Upto 205mm |
Tapping | 20mm |
Broach Cutter (50mm Length) | 12-50mm |
Motor Power | 1500 Watt |
Broach Cutter ( 3 mm Length) | 12 - 50mm |
Magnet Power | 15000 N |
Twist Drill | 23mm |
Input Supply Voltage | 220 V |
Warning This Application Must Be Earthened
- Always secure the machine with the supplied safety chain before starting to operate, this is to protect the user in case of power failure or breaking loose of the magnet while in use.
- Always wear safetygoggles, gloves and ear plugs.
- Disconnect from the power source when changing cutters or working on the machine.
- Always ensure cutter retaining screws are secure — they sometimes vibrate loose in use.
- Regularly clean the work area and machine., remove swarf and dirt, paying particular attention to the underside of the magnet
- With a gloved hand, after switching off the power, remove any swarf which might have gathered around the cutter and arbor before proceeding to the next hole.
- Remove tie, rings, watches and any loose adornments which might entangle with the rotating parts of the machine
- Should the cutter get stuck in the workpiece, stop the motor immediately toprevent personal injury. Disconnect from the power source and push and pull the arbor by hand.
- If the machine is accidentally dropped, always thoroughly examine the machine for signs of damage and check that it functions correctly before trying to drill a hole.
- Regularly inspect the machine and cutting spray which is specially designed for inverted position drilling.
- Use only spare parts advised by your dealer for magnetic drilling machines
- Use the magnetic drilling unit on a clean and flat surface only, to prevent the machine breaking out because of poor clamping force.
Self Protection : The machine operators must start their work only after wearing protective gears like eyeglasses, ear muffs, and insulated shoes tightened to the legs ensuring comfortable movement. Never operate the machine using your feet or remove the slug without wearing the gloves. Never work towards the maintenance of the circuit board if you haven't followed all the rules mentioned above.
Mandatory Rules For The Work Place
Say no to a messy work environment completely. Keep yourself protected against fatal accidents by keeping the area clean.
- In case the floor is wet, stop the usage of the drill machine immediately. You will expose yourself to the risk of shock if you don't.
- Only when the surroundings around are brightly lit, use the machine instead of a dark environment
- You should not never place flammable material near the machine or avoid using the drill machine in the presence of anything flammable. The drill machine tends to produce sparks in the process of working, which may cause Fire
- Children should never be allowed near the drill machine, especially when it is being operated.
- Nobody should be in the area where the drill machine is being used by the Operator.
- Before starting the drill machine, make sure you inspect the condition of the power cord and the plug. Replace them immediately if you see any damage.
- The power supply should always be in sync with what the equipment requires. Hence, ensure the same while making sure that safety measures for grounding and leakage are made available.
Schifler SWC 40 Magnetic Drilling Machine SWC 40
Product Brochure
Warranty | 6 months |
Weight | 12KG |
Spindle | 19MM(3/4")WELDON |
Max Torque | 450MIN-1 |
Is It Variable Speed | Variable Speed |
Motor Output | 1150WATT |
Power Consumption | 220V |
Model Name/Number | SWC 40 |
Schifler Magnetic Drilling Machine SWC 35 AT
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 350 |
Twist Drill Capacity | 19MM |
Frequency | 50HZ-60HZ |
Warranty | 6 months |
Weight | 15 KG |
Spindle | 19MM(3/4")WELDON |
Max Torque | 450MIN-1 |
Is It Variable Speed | Variable Speed |
Motor Output | 1100WATT |
Power Consumption | 220V |
Model Name/Number | SWC 35 AT |
Additional Information:
- Item Code: 8200
- Production Capacity: 5
- Delivery Time: 3 DAYS
- Packaging Details: BOX
Magnetic Core Drilling Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 50MM |
Twist Drill Capacity | 18MM |
Frequency | 50HZ-60HZ |
Warranty | 6 months |
Model Name/Number | SWC 50 MAX |
Additional Information:
- Item Code: 8209
- Production Capacity: 20
- Delivery Time: 1 DAY
- Packaging Details: BOX
Magnetic Core Drilling Machine Swc 32
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 12 |
Twist Drill Capacity | 11 |
Frequency | 50 |
Warranty | 6 months |
No Load Speed | 450 |
Power Consumption | 220v |
Model Name/Number | swc 32 |
Additional Information:
- Item Code: 8203
- Production Capacity: 50
- Delivery Time: 1 day
- Packaging Details: box
SWC 40 Magnetic Drilling Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Spindle Travel | 250 |
Width | 50 |
Twist Drill Capacity | 11mm |
Frequency | 50 |
Warranty | 6 months |
Weight | 12kg |
Spindle | 19 mm (3/4inch) Weldon |
Model Name/Number | SWC 40 |
RPM | 450min-1 |
Flexible Stroke Upto | 240min |
Broach Cutter (35mm length) | 12mm - 40mm |
Motor Power | 1100 Watt |
Magnet Power | 10000 N |
Broach Cutter (50mm length) | 12mm - 40mm |
Input Supply Voltage | 220 V |
Twist Drill | Upto 13mm |
Additional Information:
- Item Code: 8459
- Production Capacity: 50
- Delivery Time: 2 days
- Packaging Details: box
Schifler Magentic drilling Machine SWC 50
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 350 |
Twist Drill Capacity | 23MM |
Frequency | 50HZ-60HZ |
Warranty | 6 months |
Spindle | MT3, 19MM WELDON |
Max Torque | 250MIN-1/450MIN-1 |
Power Consumption | 220V |
Model Name/Number | SWC 50 |
Additional Information:
- Item Code: 8201
- Production Capacity: 5
- Delivery Time: 1 DAY
- Packaging Details: BOX
Schifler Magentic drilling Machine SWC 50 PDT
Minimum Order Quantity: 1 Piece
Product Brochure
Twist Drill Capacity | 23MM |
Brand | SCHIFLER |
Warranty | 6 months |
Weight | 16KG |
Max Torque | 250MIN-1/450MIN-1 |
Cutter Capacity | 35,50,80MM |
Is It Variable Speed | Variable Speed |
Magnet Force | 15000N |
Power Consumption | 220V |
Model Name/Number | SWC 50 PDT |
Schifler Magentic drilling Machine SWC 35 PD
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 350 |
Twist Drill Capacity | 19MM |
Frequency | 50-60hz |
Warranty | 6 months |
Max Torque | 450MIN-1 |
Cutter Capacity | 35,50MM |
Motor Output | 110WATT |
Power Consumption | 220V |
Model Name/Number | SWC 35 PD |
Additional Information:
- Item Code: 1500
- Production Capacity: 5
- Delivery Time: 2 DAYS
- Packaging Details: BOX
Schifler Magentic drilling Machine SWC 120 WT
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 350 |
Twist Drill Capacity | 45MM |
Frequency | 250 |
Warranty | 6 months |
Size | 35, 50, 80,100 MM |
Reverse Rotation | Yes |
Spindle | MK-4 |
Max Torque | 80-125MIN-1/175-300MIN-1 |
Is It Variable Speed | Variable Speed |
Motor Output | 2500WATT |
Power Consumption | 200 - 230V |
Model Name/Number | SWC 120 WT |
Additional Information:
- Item Code: 8467
- Production Capacity: 10
- Delivery Time: 2 days
- Packaging Details: box
MAGNETIC CORE DRILL MACHINE DJC 23
Minimum Order Quantity: 1 Piece
Product Brochure
Twist Drill Capacity | 23MM |
Frequency | 1500W |
Warranty | 6 months |
Weight | 21 |
Size | UPTO 50MM |
Minimum Order Quantity | 1 |
Flexible Stroke Upto | 220 |
Input Supply Voltage | 1500W |
Magnetic Base Dimensions | 200 X 100 |
Energy Saving Base | NO |
Reverse Rotation | No |
Full Load Revolutions | 390R/MIN |
Do You Require Drill Bits Also | YES |
Tool Holder | MT2 |
Spindle | MT2 |
Max Torque | 1500W |
Height Min | 200 |
Height Max | 1000 |
Cutter Capacity | CUTTER CAPACITY UPTO 50MM |
Annular Cutters | CORE CUTTER 12 TO 50MM |
Is It Variable Speed | Variable Speed |
Motor Output | 1500W |
Magnet Force | 15000N |
No Load Speed | 1500W |
Power Consumption | 1500W |
Model Name/Number | DJC 23 |
Quick change drill chuck system | YES |
Swivel Base | NO |
Additional Information:
- Item Code: DCJ23
- Production Capacity: 1
- Delivery Time: 2 DAYS
- Packaging Details: 1 plastic BOX
Core Drill Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Machine Type | Manual |
Power Consumption | 220v |
Material | Mild Steel |
Capacity | 40mm |
Number Of Shaft | 1 |
Usage/Application | metal fabrication |
Voltage | 220V |
Reverse Rotation | NO |
Size | UPTO 40MM |
Distance From Spindle To Table | 19MM(3/4")WELDON |
Weight | 12KG |
After-Sales Service Required | YES |
Cutting Depth Mm | 35MM - 50MM |
Item Weight In Kgs | 12KG |
Max Speed Rpm | 450MIN-1 |
Motor Output W | 1150WATT |
Brand | SCHIFLER |
Additional Information:
- Item Code: 8466
- Production Capacity: 50
- Delivery Time: 2 days
- Packaging Details: box
SWC 65 WT
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 80mm depth |
Twist Drill Capacity | 23mm |
Frequency | 220v-240v |
Warranty | 6 months |
Weight | 20 |
No Load Speed | RPM 250 |
Power Consumption | 1500WATT |
Model Name/Number | SWC65WT |
Additional Information:
- Item Code: SWC65WT
- Production Capacity: 25
- Delivery Time: 1-7 DAYS
- Packaging Details: BOX
Schifler magnetic-drilling-machine SWC 30
Minimum Order Quantity: 1 Piece
Product Brochure
Drilling Diameter | 25 mm |
Brand | Bosch |
Frequency | 60 Hz |
Warranty | 3 months |
Weight | 12 |
Size | 40MM |
Is It Variable Speed | Non Variable Speed |
Additional Information:
- Item Code: 26266
- Production Capacity: 10
- Delivery Time: 1
- Packaging Details: 1 PLASTIC SUIT CASE
Magnetic Core Drilling Machine Swc 50 max
Product Brochure
Drilling Diameter | 35 mm |
Weight | 16 KG |
Motor power | 1150 watt |
Spindle | MT2, 19 mm |
Frequency | 50Hz-60Hz |
Magnetic Core Drilling Machine Swc 35 H
Minimum Order Quantity: 1 Piece
Product Brochure
Drilling Diameter | 35 mm |
Weight | 9.5 kg |
Magnet power | 110000 N |
Broach cutter | 12 mm to 35 mm |
Spindle | 19 mm |
CORE DRILLING 35
DEPTH UPTO 35MM
HEIGHT OF MACHINE 225MM
SWC 65 Magnite core drilling machine SCHIFLER
Minimum Order Quantity: 1 Piece
Product Brochure
Drilling Diameter | 70 mm |
Weight | 16 kg |
Magnet power | 15000 N |
Twist drill | 23 mm |
Motor power | 1500 watt |
Spindle | MT3, 19mm weldon |
Counter sinking | 65 mm |
CORE DRILLING 65
DEPTH UPTO 80MM
TAPER SHANK DRILLING UPTO 23MM
SWC 65 WT SBMagnite core drilling machine Swc 65 WT SB
Product Brochure
Drilling Diameter | 35 mm |
Weight | 16 kg |
Motor power | 1500 watt |
Twist drill | 23 mm |
Counter sinking | 65 mm |
Spindle | MT3, 19 mm |
CORE DRILLING 65
TAPPING UPTO M20
DEPTH UPTO 80MM
TAPER SHANK DRILLING UPTO 23MM
SWC 50 MAX T Tapping Cum Drilling Machine
Product Brochure
Hole Diameter | 20 mm |
Working Stroke(mm) | 100 |
Number Of Shaft | 3 |
Material | Stainless Steel |
Functions | Drilling |
Schifler Magentic drilling Machine SWC 50 PD
Minimum Order Quantity: 1 Piece
Product Brochure
Drilling Diameter | 12MM-50MM |
Twist Drill Capacity | 23MM |
Brand | SCHIFLER |
Warranty | 6 months |
Weight | 16KG |
Max Torque | 250MIN-1/450MIN-1 |
Height Max | 35MM,50MM,80MM |
Cutter Capacity | 50MM |
Is It Variable Speed | Variable Speed |
Magnet Force | 860KG |
Power Consumption | 220V |
Model Name/Number | SWC 50 PD |
MAGNETIC DRILLING MACHINE
Product Description
Warning This Application Must Be Earthened
- Always secure the machine with the supplied safety chain before starting to operate, this is to protect the user in case of power failure or breaking loose of the magnet while in use.
- Always wear safetygoggles, gloves and ear plugs.
- Disconnect from the power source when changing cutters or working on the machine.
- Always ensure cutter retaining screws are secure — they sometimes vibrate loose in use.
- Regularly clean the work area and machine., remove swarf and dirt, paying particular attention to the underside of the magnet
- With a gloved hand, after switching off the power, remove any swarf which might have gathered around the cutter and arbor before proceeding to the next hole.
- Remove tie, rings, watches and any loose adornments which might entangle with the rotating parts of the machine
- Should the cutter get stuck in the workpiece, stop the motor immediately toprevent personal injury. Disconnect from the power source and push and pull the arbor by hand.
- If the machine is accidentally dropped, always thoroughly examine the machine for signs of damage and check that it functions correctly before trying to drill a hole.
- Regularly inspect the machine and cutting spray which is specially designed for inverted position drilling.
- Use only spare parts advised by your dealer for magnetic drilling machines
- Use the magnetic drilling unit on a clean and flat surface only, to prevent the machine breaking out because of poor clamping force.
Self Protection : The machine operators must start their work only after wearing protective gears like eyeglasses, ear muffs, and insulated shoes tightened to the legs ensuring comfortable movement. Never operate the machine using your feet or remove the slug without wearing the gloves. Never work towards the maintenance of the circuit board if you haven't followed all the rules mentioned above.
Mandatory Rules For The Work Place
Say no to a messy work environment completely. Keep yourself protected against fatal accidents by keeping the area clean.
- In case the floor is wet, stop the usage of the drill machine immediately. You will expose yourself to the risk of shock if you don't.
- Only when the surroundings around are brightly lit, use the machine instead of a dark environment
- You should not never place flammable material near the machine or avoid using the drill machine in the presence of anything flammable. The drill machine tends to produce sparks in the process of working, which may cause Fire
- Children should never be allowed near the drill machine, especially when it is being operated.
- Nobody should be in the area where the drill machine is being used by the Operator.
- Before starting the drill machine, make sure you inspect the condition of the power cord and the plug. Replace them immediately if you see any damage.
- The power supply should always be in sync with what the equipment requires. Hence, ensure the same while making sure that safety measures for grounding and leakage are made available.
MAGNETIC CORE DRILL MACHINE DJC 30
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 140MM |
Twist Drill Capacity | CORE DRILL UPTO 30MM |
Frequency | 900W |
Weight | 11.5 |
Size | UPTO 50MM |
Minimum Order Quantity | 1 |
Flexible Stroke Upto | 140 |
Input Supply Voltage | 900W |
Magnetic Base Dimensions | 200 X 300 |
Energy Saving Base | NO |
Magnetic Base Foot Print | YES |
Reverse Rotation | No |
Magnet Grade | ELECTRO MAGNETIC |
Full Load Revolutions | 450 |
Do You Require Drill Bits Also | YES |
Tool Holder | NO |
Spindle | 140MM |
Max Torque | 11500 |
Height Min | 200 |
Height Max | 1000MM |
Cutter Capacity | DEPT 35MM AND 50MM |
Annular Cutters | CORE CUTTER FROM 12 TO 30MM |
Is It Variable Speed | Non Variable Speed |
Motor Output | 900W |
Magnet Force | 11500N |
No Load Speed | 450 R/MIN |
Power Consumption | 900W |
Model Name/Number | DJC30 |
Quick change drill chuck system | YES |
Swivel Base | NO |
Additional Information:
- Item Code: DJC30
- Production Capacity: UPTO 30MM
- Delivery Time: 2 DAYS
- Packaging Details: 1 BOX
Magnite core drilling machine Swc 80
Product Brochure
Drilling Diameter | 35 mm |
Weight | 21 kg |
Spindle 2 | MT3, 32 mm |
Motor power | 1700 watt |
Spindle 1 | MT3, 19 mm |
SWC 100WT Magnetic Core Drilling Machine
Product Brochure
Drilling Diameter | 35 mm |
Weight | 28 kg |
Spindle 1 | MT3, 19 |
Spindle 2 | MT3, 32 |
Schifler Magentic drilling Machine SWC 50 WT
Product Brochure
Twist Drill Capacity | 23MM |
Warranty | 6 months |
Size | 35, 50, 80 MM |
Spindle | MT3, 19MM WELDON |
Max Torque | 250MIN-1/450MIN-1 |
Is It Variable Speed | Variable Speed |
Motor Output | 1500WATT |
Power Consumption | 220V |
Model Name/Number | SWC 50 WT |
TAPPING CAPACITY M20
SWC 120 WT Magnetic Drilling Machine
Minimum Order Quantity: 1 Piece
Product Brochure
Width | 350 |
Twist Drill Capacity | 45mm |
Frequency | 50HZ |
Warranty | 6 months |
Weight | 35kg |
Spindle | MK-4 |
Model Name/Number | SWC 120 WT |
Input Supply Voltage | 220-230 V |
Twist Drill | 45min |
RPM | 80-125min-1/ 175-300min-1 |
Broach cutter (80mm length) | 18mm - 120mm |
Counter Sinking | 80mm |
Motor Power | 2500 Watt |
Tapping | M6-M38 |
Broach cutter (50mm length) | 12mm - 120mm |
Reaming | 50mm |
Broach cutter (35mm length) | 12mm - 120mm |
Cleaning and Maintenance
- Keep a close check on the bolt of the magnetic drill. It should not be lose and the gap in the spindle should not be too large. The power cable of the drill should be in a good condition. You must make sure that the machine is maintained well.
- Inspect the carbon brush and change it immediately if you notice that it is worn out.
- The Lubricating Grease in the Gear Box should be changed by a professional once you have used the drill for three months. Inspect well once the professional finishes to double check that all the parts have been fully lubricated.
- It is always the After-Sales Service Department or the designated dealer who cater to the maintenance of the drill machine.
- The operator must clean the magnetic drill after finishing the work, scrub the side where the drill slides while working and apply lubricating oil on the drill for the machine to last longer.
- Whenever you indulge in the process of cleaning the Drill with compressed air, you must wear Goggles and protective gloves to protect yourself and the other people around you at the workstation.
- Switch the machine off and unplug it from the main power socket before you start the process or maintenance and cleaning.
Environmental Protection and Waste Disposal
- Disposal of the old electrical equipment: Make sure you process the product in accordance with EC Directive 2002/96/EC-WEEE, also known as Waste Electrical and Electronic Equipment. In case of doubts or queries, contact the Department of Waste Disposal.
- Disposal of grease: Follow the instructions given by the lubricant's manufacturer.
It is recomednded to run the machine for diameter upto 35mm on speed 1-A (300 -1 -1 min ), for diameter above 35mm to 50 mm on speed 1-B (175 min ), for diameter -1 above 50mm to 80mm on speed 2-A (125 min ) and for diameter above 80mm ot 120mm on speed, 2-B as shown.
Thread Cutting
These adapters will allow you to attach tap on the hole cutter arbor. Attach desired tap to the adaptor. Various tapping adaptors are used for thread cutting with your magnetic drilling machine SWC 120 WT
Show Picture
1. Drill a hole using suitable drill or annular cutter.
2. Place the machine at the position to be tapped , place tapping cutter adaptor in the hole cutter arbor.
3. Bring speed lever to the lowest position
4. Adjust speed with the help of speed controller
5. Shift tapping button to the right
6. Now bring the machine lever down toward the drilled hole. Once the machine makes one rotation with the tap it will automatically cut the thread in the hole as per required length.
7. Once the tapping is done, stop the machine and shift tapping button to the left (see figure) and start the machine. Spindle of the machine will automatically reverse to its starting position. Use the handles to take adaptor with tap completely out from the work piece.
Additional Information:
- Item Code: 3000
- Production Capacity: 5
- Delivery Time: 1 WEEK
- Packaging Details: 1 PLASTIC SUIT CASE